land-speed
[Top] [All Lists]

Re: [Land-speed] Web site down

To: "Jerry Foster" <fosterap@flash.net>
Subject: Re: [Land-speed] Web site down
From: "J.D. Tone" <gmc6power@earthlink.net>
Date: Fri, 2 Oct 2009 22:22:42 -0700
If your frame is 5/16" thick I would tap it with fine thread minimum 1/4". I 
would use button style allen head SS screws. (McMaster-Carr)
If I ever redo my frame I will weld on tabs at least 1/4" thick.    Good 
luck
----- Original Message ----- 
From: "Jerry Foster" <fosterap@flash.net>
To: "J.D. Tone" <gmc6power@earthlink.net>; <drmayf@mayfco.com>; "dan warner" 
<dwarner230@yahoo.com>
Cc: "landspeed@autox.team.net" <land-speed@autox.team.net>
Sent: Friday, October 02, 2009 7:24 PM
Subject: Re: [Land-speed] Web site down


> OK........I have a question.  I have my frame upsidedown on the roadster 
> I'm building (I know..world's slowest build).  I'm about to install the 
> step pan, which is a partial belly pan.  Now, the entire frame/cage is 
> airtight, with a lot of brackets welded on, and nothing actually screws or 
> bolts into the frame.  Do I screw the pan into the bottom of the frame 
> rails, or should I weld on little tabs to attach the pan.  I know you can 
> put a dab of silicone on the threads and get a pretty good seal, but I 
> wonder.  I have had a lot of help from J. D. and Rich on my build, and I 
> appreciate it.
>
> BTW, my engine goes to the dyno man in about two weeks.  Looking forward 
> to being a non-spectator.
>
> Jerry in Dallas
>
>
>
>
> ----- Original Message ----- 
> From: "J.D. Tone" <gmc6power@earthlink.net>
> To: <drmayf@mayfco.com>; "dan warner" <dwarner230@yahoo.com>
> Cc: "landspeed@autox.team.net" <land-speed@autox.team.net>
> Sent: Friday, October 02, 2009 6:10 PM
> Subject: Re: [Land-speed] Web site down
>
>
>> If you would ask the questiuons there that you ask here: you would 
>> definately get a lot more answers and ideas. It's definately your loss. 
>> good luck
>>
>>> Probably do. However,  because I am not on the forum, maybe it's 
>>> everybody on the forum that are the ones missing out on information. 
>>> To each his own, lol.
>>>
>>
>>>
>>>> Too bad, you miss a lot of information.
>>>>  DW
>>>> /  /
>>>>
>>>>
>>>>
>>>>     Oh common Doc, not even lurking??????
>>
>>>>
>>>>
>>>>     > Keith Turk wrote:
>>>>     >
>>>>     >> Hey maybe we can revive this then... LOL Just a thought... K
>>
>>>>     > Most of us have never left. I dislike forum based email so I
>>>>     never go to LandRacing.com anyway
>>>>     >
>>>>     > mayf
>> _______________________________________________
>> Support Team.Net  http://www.team.net/donate.html
>>
>> Land-speed mailing list
>>
>> You are subscribed as fosterap@flash.net
>>
>> http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Land-speed mailing list


http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>