Jarl:
How does your response fit in with one from Skip from an
earlier thread?
<<<snip>>>
Blake:
One way to tell the difference is that the .012 cam has
sharp "pointy"
lobes. The others are more rounded.
Skip Kelsey............................................
<<<snip>>>
Jarl or Carol wrote:
>
> Fuggeddaboudit!
>
> The later cam has a broader tip of the lobe (longer duration) and you would
> either end up with a MUCH smaller lobe (and screw up the rocker geometry) or
>have
> to weld up all 8 lobes - which doesn't work for more than about 3000 miles!
>
> Jarl
>
--
Blake
MG TD
MGA twin cam
Home page: http://members.nvc.net/yd3/
NAMGAR Technical Reprint Provider:
http://www.mgcars.org.uk/namgar/techpage.htm
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|