In a message dated 11/1/2004 7:52:28 AM Pacific Standard Time,
Jonathan.Hermance@ATK.com writes:
> I have, as far as I know, successfully installed MOSS urethane bushes
> (280-485) on the A-arm pivots of a TF about 30,000 miles ago and a TD about
> 5,000 miles ago. I made no modifications to anything. I did have the
> suspension all back together with a jack under the A-frame supporting the
> weight of the car before I tightened the castellated nuts against the
> shouldered washers (264-510) to slightly compress the bushes. Then I backed
> off the nuts slightly to insert cotter pins through the embrasures in the
> nuts closest to the holes through the pivot (264-270).
Thanks Jonathan for this info, you are the only one to respond so far. Wht
you did sounds right to me.
Terry
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|