Howard Battan wrote:
> I would like to check the timing on my 54 MGTF 1250. The only reference I
> can find is for using static TDC timing. I'd like to be able to use a timing
> light. Is this feasable for this engine?
>
> Thanks
>
> Howard Battan
> _______________________________________________
>
>
>
Sure thing, Howard. See http://www.ttalk.info/Tech/Advance_curves.html
for an idea of what to expect for timing as a function of engine speed.
At idle you'll probably see about 5-6 degrees of advance. IMHO, static
timing with a test lamp is the best way to go.
Bud Krueger
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|