Has anyone successfully used the speedi-sleeve with the XPAG oil seal
kit? It wouldn't fit my engine. After I got mine all back together,
it leaks a little and I want to know if it actually can work. The
directions for the speedy sleeve in the seal instructions contradict
the addendum which tells you to put the sleeve on backwards.
I had an engineer look it over and he had me grind off the excess
edge of the sleeve to get enough clearance to not hit the Moss adapter.
Moss is no help. Their tech support guy didn't even know what the
speedi-sleeve was and I had to send him the part number so he knew
what I was talking about.
If I had to do it again, I would keep my $250 pull the pan and
replace the cork rear gasket with some modern sealer. I think that
is where the oil was coming from anyway.
Mike
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|