Question for those in the know: I am trying to identify some brass bolts I
have and if they are for the T series tappet cover. The bolts have a 3/16
whitworth head with an intrigral shoulder washer. They measure 1.5 inch
overall length, a 3/8th diameter and they are threaded on the inside. They do
not fit my TD which has an aftermarket aluminum side cover and uses a similiar
bolt with a 1/4 whitworth head. Could these be different than the stock bolts
with the pressed steel cover?
John F. Quilter
Brisbane, California
______________________________________________
Mg-t@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|