In a message dated 11/30/2000 12:35:48 PM Eastern Standard Time,
jamesnazarian@netzero.net writes:
<< Can anyone give me torque numbers for the
flywheel to crank bolts
preasure plate to flywheel bolts
and the belhousing to engine bolts
all on a 63 Buick Special 215 with factory 4-sp and bellhousing
>>
James, here's what I used ( in ft/lbs):
flywheel to crank bolts 50-60
pressure plate to flywheel bolts (depends on bolt size - my flywheel had 2
different size bolt holes - used the small one)
the bellhousing to engine bolts upper housing to block 30-35 lower
housing to block & to upper housing 20-25
|