Hi Tony,
My rack is more forward than above the crossmember, leaving enough of a gap
to get your hand in - or a forearm stuck as a friend found out. The front
face of the block i.e. where the front cover fits is just about in line with
the top front edge of the cross-member so the rack sits under the gap
between the front cover and pulley.
Cheers,
Paul.
----- Original Message -----
From: "Tony Bates" <tony@batesfamily.net>
To: "Telewest (PH)" <paul.hunt1@blueyonder.co.uk>
Cc: <mgb-v8@autox.team.net>; <buick-rover-v8@autox.team.net>
Sent: Tuesday, December 10, 2002 4:16 PM
Subject: Re: MG V8 conversion
> Hi Telewest,
> On my chrome bumper crossmember the rack is approx 1 1/2" above and approx
1" forward of the front
> of the crossmmeber. If the sump is near "touching" the crossmember, where
does the steering rack go?
> Regards
> Tony
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|