mgs
[Top] [All Lists]

Re: Easy Brake Question #2

To: bharkins@tfb.com
Subject: Re: Easy Brake Question #2
From: Skip Kelsey <kelsey@value.net>
Date: Fri, 25 Apr 1997 07:42:25 -0700
Bill:
Silicone has to be bled very slowly, and should be followed up a day or two
later. It has a tendecy to trap air if not handled properly. It is better
to start out with all new brake componets. On Tds and Tfs I have had to
take out the piston on the master cyl, and cut 50 thou off of it, to allow
the piston to return farther, or the brake light sticks on at times. Also
silicone has a nasty habit of eating old style brake light switches.


Skip............At 08:13 PM 4/24/97 -0700, Bill Harkins wrote:
>Skip Kelsey wrote:
>
>> I run my 69GT,48 Y saloon, and 52 TD on
>> silicone dot 5. There are some tricks to using it, but it doesnt destroy
>> the system.
>
>What are the tricks, and what if any, problems with 5?
>
>Bill Harkins
>Fallbrook, CA
>
>
>
>


<Prev in Thread] Current Thread [Next in Thread>