There are three studs on the door. Measuring from the latch side
of the door the first one is 5 7/8 the next one is 12 1/2 and the last one
, the one nearest the hinge is 20 1/8. If you measure from the trim on the
door they should be about 1 1/8 inches from it. If the holes have been
filled in you should be able to feel them by reaching in the door pockets.
This is how you tighten the studs up when they come loose.
...Art
On Fri, 1 Aug 1997, JP Labuschagne wrote:
> Regarding the tonnaeu (SP) cover. Is this model supposed to have the
> lift the dot studs (male part) on the doors? if so is it four studs and
> how are they spaced? Is it worth putting them in (at present mine
> doesn't have them) what are the advantages/ disadvantage e.g. tonnaeu
> seals better but sidecreens don't.
>
> Help will be appreciated.
> Safety Fast
>
> '57 MGA
> '68 Porsche 911T
>
|