William G Abbott wrote:
>
> Does anyone know if the MGB lower control arm anti-sway link, hole is drilled
> "centered" in relation to the centerline of the control arm. I have a "new"
> arm and the hole is off center. As I assemble the lower control arm / pan
> assembly, new front arm only, the rear arm (old) and the spring pan (old)
>seem
> to be square. As soon as I put the third piece of the assembly together the
> off center hole prevents the outboard holes (lower king pin bolt) from being
> square. This is the first time in twenty years I have had this problem. Has
> anyone else?: -((
Try reversing the arms from left to right and vice versa. If i
understand your problem, this hole is off centered for the sway bar hole
. I had this problem when i was rebuilding the front suspension on my
66b.
|