Vallely wrote:
>
> Hello--
> Any of you folks know how to make a condenser to get water out of
> compressed air? It's turning my sand blaster into a squirt gun.
> I'm planning to run about 30 feet of 1/2", thin-wall copper tubing
> around the cieling, with sweated connections. I have a Sears filter I'll
> put at the end of the copper and attach my 25' x 1/4" air hose to it.
> I'll pitch the whole thing so it drains.
> If anyone out there has any know-how on the subject, I'd appreciate
> hearing whether I'm on the right track before I put it together. Is that
> enough copper? Are sweated connections OK?
> Thanks.
> John Vallely
> '59 mga
I had the same problem, although not as much line, I had to run my a/c
full time in the shop to keep the humidity down. I also installed a
disposible silica filter that I got from Grainer. It has taken care of
about 90 percent of the moisture, a water trap on the end of the hard
line where I hook my soft line to completed the solution.
Thanx Mark Snowdon
69 Sprite
73 Midget
79 Midget
|