Hi J,
No T-nuts. As I recall, there are nuts on the ends of the bolts where
they
protrude throught the frame. After they're removed, the bolts are still
stubborn. Grab the head with a pair of vice grips and pull while twisting.
They'll come out.
Bud Krueger
52TD
77MGB
JAbasta@aol.com wrote:
> Are there t-nut holding the running board to the wooden frame on a TD?? I've
> removed
> the bolts from the front/back fender going into the running board, also remove
> the nut on the 3 bolts going into the wood frame.. Cant seem to get the bolts
> out. Do I tap it out with a hammer or is there a t-nut on the wooden frame??
> TIA
|