mgs
[Top] [All Lists]

RE: "Prothane" Poly Bushings

To: wizardz@maxinter.net
Subject: RE: "Prothane" Poly Bushings
From: "Dodd, Kelvin" <doddk@mossmotors.com>
Date: Wed, 28 Apr 1999 12:35:27 -0700
Paul:

        The "Prothane" bushings are a polyurethane bush, not a Nitrile or
Delrin.  I just checked the Midget lower A-arm ones, they are pretty soft.
I can squeeze the small end almost shut between finger and thumb, and I am
no Goliath.  "Prothane" is just the manufacturers name for the product
range. 


Michael:

        The lower A arms take 2 kits, 4 bushings per kit.  The catalog is
confusing and does not give quantity required, but only quantity in the kit.
Apologies.  There are notes in the computer, so the salesperson, or
distributer would catch the mistake.


Kelvin.

 

> -----Original Message-----
> From: wizardz@maxinter.net [mailto:wizardz@maxinter.net]
> Sent: Wednesday, April 28, 1999 11:47 AM
> To: Michael Graziano; Spridgets (E-mail); MGList (E-mail)
> Subject: Re: "Prothane" Poly Bushings
> 
> 
> ...way too hard...unless you don't mind the vibration
> polyurothane are hareder than stock as well but are a happy median
> between crappy melt in you hand stock rubber and the rock 
> hard Prothane 
> bushings.
> Leave those prothanes to the racers 
> 
> Paul Tegler
> Twin 73' MGB GTs YB and OB
> YB born 8/72 (Primrose Yellow) Yellow BGT
> OB born 1/73 (Blaze Red) Orange BGT
> North of Annapolis, South of Baltimore
> email: wizardz@maxinter.net
> http://www.amdyne.net/~ptegler/mgmain.htm
> -----Original Message-----
> From: Michael Graziano <mgrazian@ltcm.com>
> To: Spridgets (E-mail) <spridgets@autox.team.net>; MGList 
> (E-mail) <mgs@autox.team.net>
> Date: Wednesday, April 28, 1999 3:55 PM
> Subject: "Prothane" Poly Bushings
> 
> 
> I'd like to eventually change the front bushings on the 
> Midget.  Has anyone
> any experience with the Prothane Poy bushings Moss has in 
> their catalog?  
> 
> If I go by the catalog,  I need 4 for the front lower control 
> arm, 4 for the
> upper control arm, and 2 on my sway bar.  Is this correct?
> 
> Michael
> 
>   _____________________________________
> /                                     \
> |           Michael Graziano            |
> |   Long Term Capital Management L.P.   |
> |         Phone: 203-552-5706           |
> |         Fax:   203-553-5869           |
> |       Email: mgrazian@ltcm.com        |
> \_____________________________________/
> 
> 

<Prev in Thread] Current Thread [Next in Thread>