[Top] [All Lists]

MGA heater vent screw length

To: <>
Subject: MGA heater vent screw length
From: "Dean Crowley" <>
Date: Thu, 5 Aug 1999 21:39:07 -0500
You have to but a short screw in the heater box on the back near the end of
the brake master cylinder.
If it is to long you can not put the defroster vent connector on. The place
where the vent hose connects
to the heater box down under the dash. Of course if you use the original
fasteners then there isn't a problem.
But if you try to use some new fasteners that one must be shorter then all
the others...

<Prev in Thread] Current Thread [Next in Thread>
  • MGA heater vent screw length, Dean Crowley <=