[Top] [All Lists]

Re: Loctite problem

Subject: Re: Loctite problem
Date: Sat, 14 Aug 1999 16:34:04 EDT
You did not say where the screw is, but if you can heat it, Locktite turns 
into a power at 450 degrees F. 
BTW did you use blue or the red stuff?  Blue can be disassembled, but the red 
stuff is stronger than a grade 8 bolt when properly applied.  This means that 
you will peel the threads off the bolt on disassembly when Red Locktite was 
used correctly (unless you can heat the assembly).
Hope this helps,
Rick Ewald

<Prev in Thread] Current Thread [Next in Thread>