mgs
[Top] [All Lists]

RE: 67B loading up

To: cfrench@cybertours.com, mvheim@studiolimage.com
Subject: RE: 67B loading up
From: Duinhoven_Hans@emc.com
Date: Tue, 27 Jun 2000 02:15:03 -0400
Better check the butterfly spindles for any play @ all.
When I finilyzed tuning the carbs the spindles were quite stuck - so a
little oil helped a lot. Neglecting regular lubrication to the bearings
(every month I'd say) prevents premature wear. - I'm not saying you've
neglected yours Carl!

Cheers,

Hans

-----Original Message-----
From: Carl French [mailto:cfrench@cybertours.com]
Sent: maandag 26 juni 2000 19:05
To: Max Heim
Cc: MG List
Subject: Re: 67B loading up


Max Heim wrote:
> 
> May be running a bit rich. Have you tuned the carbs since the rebuild?
> Sometimes when they're leaking air through the bushes you wind up setting
> them rich to compensate.
>  
Good thought, I think my mechanic who helped me restart the engine after
I rebuilt it might have turned it 'a couple of flats' but you might have
a good idea there. I am curious about the tendency for the problem to
get worse though (my own immpression).
Carl

<Prev in Thread] Current Thread [Next in Thread>