FWIW, I have SPAX shocks on all four corners of my car, on the fronts they
included new hoses. The hoses use a banjo bolt for the front calliper,
therefore requires two crush washers per side. My kit came from the UK, so
depending on your source they may have considered this type of brake line
setup.
james
----- Original Message -----
From: British Sportscar Center <Lawrie@britcars.com>
To: Maynard Hirsch <mghirsch@netzero.net>; <mgs@autox.team.net>
Sent: 28 March, 2002 9:56 AM
Subject: Re: Novice brake problems
> The front hoses attach to the calipers with a
> copper washer to seal the joint, the rear hose has a copper washer at the
> threeway fitting.
>
> Lawrie
> British Sportscar Center
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|