mgs
[Top] [All Lists]

Re: remote starter switch

To: "Bill Mills" <williem@mindspring.com>, <mgs@autox.team.net>
Subject: Re: remote starter switch
From: "Telewest \(PH\)" <paul.hunt1@blueyonder.co.uk>
Date: Mon, 20 May 2002 18:52:21 +0100
Having the remote switch connect a fused 12v supply to the white/red
terminal of the starter relay is the safest and lowest current option.  If
you pick up the purple circuit (bottom fuse in the 4-way fusebox) you can
also crank the engine with the ignition off, if that would be useful.

----- Original Message -----
From: "Bill Mills" <williem@mindspring.com>
To: <mgs@autox.team.net>
Sent: Monday, May 20, 2002 10:57 AM
Subject: remote starter switch


> I need to do some work on the distributor of my '74 'BGT and I need to rig
a
> remote switch to turn the engine.  Where should I connect the remote
starter
> switch leads??  I assume that I can hook up at the starter relay which is
> located on the inner fender, passenger side, just back of the fuse box.
> Which leads do I clip on to?  Is there a better place to hook up than the
> starter relay?

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>