You guys might want to check out this page:
http://www.mgbexperience.com/service/weber-hose.html
Answered most if not all of my questions on the subject.
Harold
----- Original Message -----
From: "Paul Root" <proot@iaces.com>
To: "Barney Gaylord" <barneymg@ntsource.com>
Cc: "Bill Meyer" <wcameyer@msn.com>; "The MG List" <mgs@autox.team.net>
Sent: Thursday, August 01, 2002 10:56 AM
Subject: Re: Air Rail Plugs
> Ok, so what do I do with the other end? The gulp valve into intake
> manifold?
>
> Would retuning be required?
>
> I suppose anti-seize on the set screws would be good.
>
> Paul.
>
>
> Barney Gaylord wrote:
>
> > At 04:43 PM 7/31/02 -0700, Bill Meyer wrote:
> >
> >>I have sent a '74 head off to be rebuilt. What size plugs do I need to
> >>close off the holes for the air rail fittings?
> >>
> >
> > 7/16-20 UNF or SAE thread. Socket head set screws of the appropriate
> > length to fit flush give it a good appearance.
> >
> > Barney Gaylord
> > 1958 MGA with an attitude
> > http://www.ntsource.com/~barneymg
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|