mgs
[Top] [All Lists]

Re: Size of the front wire wheel hub nut...

To: "Andrew B. Lundgren" <lundgren@byu.net>, <mgs@autox.team.net>
Subject: Re: Size of the front wire wheel hub nut...
From: "MonteMorris" <mmorris@nemr.net>
Date: Tue, 20 Aug 2002 22:16:47 -0500
1 1/8 SK socket


----- Original Message -----
From: "Andrew B. Lundgren" <lundgren@byu.net>
To: <mgs@autox.team.net>
Sent: Tuesday, August 20, 2002 1:34 PM
Subject: Size of the front wire wheel hub nut...


> To my surprise I found that the nut with the clevis pin holding the front
hub on is not the
>
> same as the one on the back.  (I am doing th drivers side first, so I
don't know what the
>
> otherside has.)
>
> Is this normal?
>
> If so, can someone tell me what size the front nut is? (I need to buy big
socket
> on my way home from work, but don't know what size...)
>
> I looked in my factory manual, it just says to take it off.  I got the
back off with no
> problem. 1-5/16" IIRC.  My porter says about the same...  (I will try Moss
next, didn't
> think of that!)
>
>
> (Thank goodness for air tools, without them I was cranking the engine over
with my ratchet on the
> nut.)
>
>
>
> --
> Andrew Lundgren
> lundgren

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>