mgs
[Top] [All Lists]

Re: tacho disturbances

To: "Kevin D. Richards" <flybirds@starpower.net>, <mgs@autox.team.net>
Subject: Re: tacho disturbances
From: "Telewest \(PH\)" <paul.hunt1@blueyonder.co.uk>
Date: Wed, 21 Aug 2002 09:38:41 +0100
Connect another tach to the white/black at your existing tach for voltage
pulse types i.e. 73 model year on.  For current pulse types connect it to
the distributor lead on the coil, but there could still be problems in the
white feed to the coil that comes via the tach.  However these are likely to
cause misfiring and/or cutting out so if it isn't doing this you can
discount that potential problem.  There is said to be a potentiometer in the
tach but I have never looked.  A sport coil should make absolutely no
difference at all - unless it is bad which is likely to cause misfiring and
an erratic tach.

----- Original Message -----
From: "Kevin D. Richards" <flybirds@starpower.net>
To: <mgs@autox.team.net>
Sent: Wednesday, August 21, 2002 2:21 AM
Subject: tacho disturbances


> come to mention it, I have a sport coil, and my tacho does not read
correctly,
> is there some type of test or check I can do to make sure it is the
> wiring/electricity and not the tach to blame?
> is there an adjustment I can make to the tach to get it to read lower?
> cheers

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>