3 of the 4 leak. Sounds like it is the wrong size...
I as soon as I noticed, but just wanted to make sure.
Thanks!
On Sun, 01 Sep 2002 00:10:45 -0400, Jerry Erbesfield wrote:
>Absolutely not. Your valve stems should not leak at all. Mine don't. I
>spent 25 years in the car business, have had numerous alloy wheels over
>time and have never had a valve stem leak when pushed off to the side
>like that, except on the rare occasion that a stem was bad, such as when
>aged, rotted or split, as you indicated might be possible. The stems are
>made of similar (rubber like composite material) to the tires and they
>do eventually break down, oxidize and decay over time just like tires
>do. Any good tire/wheel shop should always recommend the replacement of
>valve stems when mounting new tires. That's normal SOP at most tire
>places.
>
>I guess it is possible that the wrong size/type valve stems may have
>been mounted in the wheels too though. Different type valve stems are
>used for steel and alloy wheels. Alloy wheels are much thicker than
>steel wheels so they require a longer neck where it fits to the wheel.
>Either way, they should NOT leak at all. Do ALL of them leak?
>
>-Jerry Erbesfield
>73 B Black Beauty roadster
>jerbesfield@mindspring.com
>website- http://jerbesfield.home.mindspring.com
>
--
Andrew Lundgren
lundgren@byu.net
http://www.Lundgren.us
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|