Thanks for the info! They are a nice exotic item, not to be classified as
inexpensive for sure!
Lambdin, Mike wrote:
> Yes, there are steel wheels with center locks. I believe they were available
>on the 1600 Mk 1 & Mk 2 twin cam. The diameter of the splined (sp) axles are a
>larger , however, than those on the wire wheels. If you want to convert from
>wire wheels to the steel wheels, with knock-offs, you'll have to change the
> Not a cheap conversion, unless you can get some good used axles. If you have
>racing in mind you'd be better off getting a set of minilites. This would be
>cheaper. You could also get a set of 60 or 72 spoke wires - this, too, would
>be less expensive.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive