At the bottom of the dash is a square hollow beam. I drilled a hole
in it above the hood handle, made an L-shaped bracket and mounted the
manual choke for a 76B with HIF's there. Physically, it is above the
hood release handle sufficiently to not mix the two.
Did this 'cause I could not reach the blank on the dash with my hands.
Works fine and the cable has a straight shot through an existing hole in
the firewall.
Bill
'76B
On Fri, 4 Apr 2003
Mowog1@aol.com wrote:
> I used the dash position of the instrument panel rheostat...and located the
> rheostat to the blank plug on the dash just above its original
> position....gave me a stronger mounting point for the choke...and the
> rheostat works just fine...all on my "78 MGB
>
> rick ingram
> 1978 mgb
> 1969 mgc
> 1974.5 mgb/gt V8 conversion
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|