mgs
[Top] [All Lists]

Re: Coolant in oil - cleaning up after

To: "Parenti, Mark" <Mark.Parenti@Sun.COM>, <Mgs@autox.team.net>
Subject: Re: Coolant in oil - cleaning up after
From: "Telewest \(PH\)" <paul.hunt1@blueyonder.co.uk>
Date: Tue, 29 Apr 2003 12:37:08 +0100
Take it for a good long drive to get it hot enough to boil off the remaining
water.  Personally I would have done that after the initial oil and filter
change, then changed them again afterwards.  Short runs just end up putting
more condensation in the oil, and fuel if the choke was out at the time.

----- Original Message -----
From: "Parenti, Mark" <Mark.Parenti@Sun.COM>
To: <Mgs@autox.team.net>
Sent: Monday, April 28, 2003 9:17 PM
Subject: Coolant in oil - cleaning up after

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>