Re: Intake manifold

["mgamgb" <mgamgb@ihug.co.nz>]

If you have a single carb manifold, there is a  nut deep down between the
no2 inlet/exhaust and another between the no3 exhaust/inlet that are
difficult to see, let alone loosen. You may have to sacrifice a spanner and
grind and bent to shape to get at these.

Rumour has it that these two nuts were put in the jig first, and the rest of
the car was assembled around them :)

Cheers

Ian F



--- O

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive