re/ side covers & gaskets

["Richard" <ramsmgb@cox.net>]

Jim,
 
I used rubber gaskets also. First I used silicone sealer to adhere the
gasket to the covers, then used permatex black (non-hardening) between the
gasket and the engine body.  Just tighten them enough to slightly compress
the gaskets.  Put everything back together and run the engine and check for
leaks. If a slight leak you can tighten the nuts a bit.
 
Good luck, mine have not leaked for 5 years.
 
Rich
72 MGB w/ OD