If it's the gearbox end you may not need it anyway. I didn't realise for
many years that *all* MGBs had this at the gearbox end, neither of mine do,
and the turn in the cable doesn't seem to have caused any problems ... so
far.
PaulH.
----- Original Message -----
From: "Jim Baustian" <jabaustian@att.net>
To: <mgs@autox.team.net>
Sent: Tuesday, August 17, 2004 11:04 PM
Subject: Angle Drive repair
> The usual cause of failure of the speedo angle drive is breakage of the
> short piece of speedo inner cable that inserts into the pinion in the
> gearbox.
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|