Just drill it out trying not to let the drill wander. I used an ordinary
pop-rivets when replacing my half hinge and it has been OK since, although
it probably isn't as strong as the original if forced ... which was why I
had to replace the half-hinge in the first place!
----- Original Message -----
From: "Larry Daniels" <email@example.com>
To: "Spridgets List" <spridgets@Autox.Team.Net>; "MG List"
Sent: Friday, October 08, 2004 4:18 PM
Subject: Vent window pivot rivets
> I need to replace the vent window assembly's upper pivot/hinge. It is
> to the frame with a solid rivet with a slightly domed top. I'm unfamiliar
> with how these rivets work. How is the old one taken out and the new one
Check out the new British Cars Forum: