[Top] [All Lists]

Re: Tie Rod Tightening

To: "Mike L" <>,
Subject: Re: Tie Rod Tightening
From: "mgamgb" <>
Date: Fri, 6 May 2005 08:55:17 +1200
Use a plain nut first to seat the taper, then remove and replace with nyloc

Ian F
----- Original Message ----- 
From: "Mike L" <>
To: "Randy Widman" <>; <>
Sent: Friday, May 06, 2005 1:47 AM
Subject: Re: Tie Rod Tightening

> Clamp the ball joint or otherwise force the taper fit into the steering
> (Or use a castellated nut and drill a hole for a cotter pin).
> Mike
> >
> > How does one go about tightening up the lower nut on the tie rods? It
> > keeps spinning when I try to tighten. TIA
> >
> > Randy Widman

<Prev in Thread] Current Thread [Next in Thread>