Re: Heater Control Knobs - There Must be a Trick

["R. Martin Rogovein" <rmort@bezeqint.net>]

> There should be a small hole on each knob (at least there is on the79B).
Put
> a small nail into the hole and push the pin inwards. This should allow you
> to pull the knob off the shank.

But be careful - if you have to break it, break the plastic, not the metal
post.
The knobs can be scrounged up, the controller/post are unobtanium.
[guess how I know]
rmort
70 roadster
Tel Aviv