[Top] [All Lists]

Re: Rear Exhaust Mount

To: "Zach Dorsch" <>, "MG LIST"
Subject: Re: Rear Exhaust Mount
From: "Paul Hunt" <>
Date: Fri, 13 May 2005 10:09:49 +0100
The body bracket, the large 'C'-bracket, and the two rubber 'cotton reels'
that join them are the same.  The two-part bracket that clamps on to the
tail pipe is different between twin carb and dual carb models (although the
4-cylinder single carb item is the same as the twin-carb V8, funnily
enough).  Don't forget the C-bracket is handed, there is a slight set in one
direction so it sits square to the angle of the tail-pipe.


----- Original Message ----- 
> Does anyone know if the rear exhaust bracket (the part that mounts to the
body) from a 74-80 B will fit a 73 B?

<Prev in Thread] Current Thread [Next in Thread>