[Top] [All Lists]

Re: Breather tube

To: "mgs" <>
Subject: Re: Breather tube
From: "Ray Wygonik" <>
Date: Mon, 14 Aug 2006 08:07:33 -0400
Had e-mail issues over the weekend.  thanks everyone for the quick response 
Fridayt.  Need some more advice.

I have a Weber 32/36 DGV downdraft carb.  (too lazy to mess with the SUs) 
Not aware of any vent fittings on it for the bowls.  There is one fitting at 
the base of the carb that (I hope) is vacum. I plan to attach it to my vacum 
advance on the dizzy.  I was drawing off the intake for the vacum but moving 
that port to the anti-run on valve.

Is there a vent on the Weber that should be connected to the carbon 
Is the port at the base of the weber on the engine side a vacum port?
What benefits will I get from venting the crankcase?  (I am picking up a 
vented cover from the list -thanks Pete)

<Prev in Thread] Current Thread [Next in Thread>