That is certainly possible and will be tested. Same
with the pushrods.
rick
--- The Roxter <rocknatural@gmail.com> wrote:
> Rick Lindsay wrote:
> > Hello Steve and other friends,
> >
> > The asymmetrically oxidized valve head on the #2
> > cylinder ( http://www.aubard.us/MGB/HPIM0862.JPG )
> led
> > me to assume that the discoloration was related to
> the
> > pressure leak. And so it seems is the case.
> >
> > Here's a look at that valve from the stem end
> > http://www.aubard.us/MGB/HPIM0884.JPG . The dull,
> > black area is where the valve hasn't been closing
> > completely. The build-up on the back of the valve
> > head is normal for an old, rarely used,
> > long-since-rebuilt engine. Removing all this crud
> > will make a big difference in how the engine
> starts
> > and runs.
> >
> > A further look at the valve seat confirms the
> problem
> > http://www.aubard.us/MGB/HPIM0885.JPG
> Looks like the valve stem is slightly bent.
>
> -The Roxter
> --
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
>
> You are subscribed as rolindsay@yahoo.com
>
>
> Mgs@autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|
