mgs
[Top] [All Lists]

[Mgs] Spot weld mill, need picture

To: mgs@autox.team.net
Subject: [Mgs] Spot weld mill, need picture
From: Barney Gaylord <barneymg@mgaguru.com>
Date: Tue, 09 Sep 2008 01:16:08 -0500
Does anyone have a picture, or a retail source, or a manufacturer's 
name and model number, for a spot weld mill?  I have used one of 
these (borrowed), but I need a picture.

This tool looks like a hand held air drill that holds an end mill 
cutter.  It also has a C-frame holding a small anvil in front of the 
cutter.  Position the tool over a spot welded sheet metal flange in 
line with a spot weld, pull the trigger, the milling cutter moves 
forward with some force to contact the weld while turnimg to cut 
through the first layer of metal.  Depth of cut is controlled by 
adjusting position of the anvil.

Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com
_______________________________________________
Support Team.Net  http://www.team.net/donate.html




Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>