mgs
[Top] [All Lists]

Re: [Mgs] vacume

To: "Tom Gunderson" <thgun@comporium.net>, <Mgs@autox.team.net>
Subject: Re: [Mgs] vacume
From: Barney Gaylord <barneymg@mgaguru.com>
Date: Sat, 14 Nov 2009 16:17:47 -0600
At 12:05 PM 11/14/2009 -0500, Tom Gunderson wrote:
>I have a 1957 MGA 1500 rst. I am looking for the connection of the 
>vacume tube. It is comming from the distributor and is copper with a nut.

Other end of the tube screws into a small port on bottom of the rear 
carburetor.

>I also need the to know what the order of the sparkplug wires are 
>giong from the distributor to the plugs.
>....

If the distruibutor drive is installed properly (big if), the dizzy 
cap terminal nearest #1 spark plug gets connected to #1 
plug.  Following counter-clockwise around the dizzy cap, firing order 
and wire connections are 1-3-4-2.

_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • [Mgs] vacume, Tom Gunderson
    • Re: [Mgs] vacume, Barney Gaylord <=