mgs
[Top] [All Lists]

[Mgs] master cylinder hone

To: "MG Digest (E-mail)" <mgs@autox.team.net>
Subject: [Mgs] master cylinder hone
From: "Councill, David" <dcouncill@msubillings.edu>
Date: Sat, 16 Jan 2010 11:32:35 -0700
I am looking for a master cylinder hone as I start the rebuild of my 64B
hydraulics. Any suggestions or sources? I had one that worked on wheel
cylinders but the bore is wider so those are easy to find. The smallest I see
listed, at least at NAPA, is 7/8" and larger bores. It looks like the bore, at
least on a spare one (brake, but it looks like clutch may be similar or same)
that I have, is about >" (approximate, I used a tape measure).



David Councill

64 B

67 BGT

72 B

_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>