Robert,
Repair switch here:
http://mgaguru.com/mgtech/electric/ts101.htm
Test flasher unit here:
http://mgaguru.com/mgtech/electric/et104.htm
Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com
At 04:57 PM 2/9/2010 -0600, Robert J. Guinness wrote:
>I have an MGA 1600 with the pnuematic turn signal switch on the dash
>(Moss #162-400), and the barrel type flasher unit on the firewall
>(Moss # 141-750). The pnuematic part of the turn signal switch
>never worked so I just hold it to the side until I finish my turn.
>Recently, holding the lever only initiates two -- and only exactly
>two -- blinks on the turn signal lamps. The same thing happens
>with the front and back lamps and on either side. Is this a turn
>signal switch problem, or a flasher unit problem? Is there a
>diagnosis protocal to follow to isolate the problem? I never
>repaired pnuematic turn signal switch because one of the screws
>holding the case of the switch together is stripped (the head is
>intact, but it and turns freely in the threads without moving out
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation - $16.22
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|