mgs
[Top] [All Lists]

Re: [Mgs] Radiator (metal) fan blades, which way?

To: Barney Gaylord <barneymg@mgaguru.com>, mgs@autox.team.net
Subject: Re: [Mgs] Radiator (metal) fan blades, which way?
From: Bill Mills <bmills46@earthlink.net>
Date: Fri, 10 Sep 2010 17:00:19 -0400 (GMT-04:00)
This answered what I was trying to ask.  That is what I was trying to ask 
about, the notches, mine was installed correctly around.  Just wanted to 
confirm before I re-installed it.

Bill


-----Original Message-----
>From: Barney Gaylord <barneymg@mgaguru.com>
>Sent: Sep 10, 2010 4:51 PM
>To: Bill Mills <bmills46@earthlink.net>, mgs@autox.team.net
>Subject: Re: [Mgs] Radiator (metal) fan blades, which way?
>
>Any curved fan blade goes with the convex side forward.
>
>Early MGB metal blade has notches in the forward edges to clear the 
>rearward extending bottom tank of the radiator.  See here: 
>http://mgaguru.com/mgtech/cooling/pics/b_fan.jpg
>
>Barney Gaylord
>1958 MGA with an attitude
>http://MGAguru.com
>
>
>At 11:52 AM 9/10/2010 -0400, Bill Mills wrote:
>>.... I could not decide which way around the 6 blade metal fan 
>>should be attached. The metal fan blades are cut such that there is 
>>a "cut away" side to each blade.  Should this "cut away" side be to 
>>the front (radiator side) or to the back (block side)?
>>....
_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>