Rick, something is not right and will bet it is with the hub. there
is no choice of rotors for different years of MGBs. none that I can see.
paul
On Nov 17, 2010, at 7:09 AM, Richard Ewald wrote:
> Again my buddy is having an issue putting his 67 B back together.
> He bought new brake rotors and he tells me the hole in the center
> for the
> hub is not large enough to go onto the hub.
> He says the hole in the rotor is 2.85" and the hub is 2.95" Not
> quite 1/8"
> inch too small.
> I always thought that B rotors were a case of buy one fits all. I
> haven't
> gone and looked at it myself, but I have to admit from his
> description, I am
> stumped.
> Anybody got any ideas?
> Rick
> _______________________________________________
>
> Mgs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/mgs/paul@ece.rochester.edu
>
Paul Osborne
Department of Electrical and Computer Eng
University of Rochester
201 Hopeman Build RC
Rochester NY 14627
585-275-5226
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|