Paul,
Are not all four pads the same? I have a new set of Mintex pads in hand,
and they seem to be.
Does the calliper move easily, sliding in and out? As there is one piston,
the pressure of the piston moves the calliper to center the assembly on the
disc.
Sticking of the calliper does not seem to be your question, though.
Bob
---------- Original Message ----------
From: Paul Root <ptrmgb@gmail.com>
To: MG List <mgs@autox.team.net>
Subject: [Mgs] brake pads
Date: Thu, 9 Jun 2011 12:53:44 -0500
I found the problem with my brakes binding up and pulling hard to the right.
It seems the Classic Gold pads I bought don't fit. I forced them in enough to
get the cotter pin in and figured it would seat itself correctly, but no, it
didn't, the inside pads got stuck, and wouldn't move in the caliper.
Measuring
they are a good .02-.03 inches wider than the stock pads I pulled out.
I've sent mail to Kelvin about it, but he's on vacation (probably in his barn
under a car :-) ).
I'm wondering if I could grind the edges (metal backing) to make them fit?
The
outside pads fit fine.
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbob@juno.com
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|