[Top] [All Lists]

[Mgs] Adhesive suggestions for carpet and seats

Subject: [Mgs] Adhesive suggestions for carpet and seats
From: dcouncill at (Councill, David)
Date: Tue, 29 May 2012 16:51:25 +0000
References: <94A7C2B62CBF4DEABCAEBB25105A8DA5@SteveLenovo> <> <AF4315D031654D55944ECBA0D11DE3B3@paul>
I'm a little late on this but I can add a bit to what Paul says. When I did my
72B, the previous owner had glued in all  the carpet pieces and it was a real
pain to remove. So with that lesson, I installed the new carpet with minimal
glue. I used a 3M spray adhesive, and I lightly sprayed the sill and rear arch
pieces. The heel board attached with screws as I recall. The tunnel piece,
floor pieces, and rear had less need to secure, and definitely not requiring

David Councill
64 B
67 BGT
72 B

-----Original Message-----
From: mgs-bounces at [mailto:mgs-bounces at] On 
Of PaulHunt73
Sent: Tuesday, May 29, 2012 9:57 AM
To: mgs at
Subject: Re: [Mgs] Adhesive suggestions for carpet and seats

Carpet does need gluing on sills, rear arches, and heel board.  (Toe boards?
Can't remember).  It's true floor carpets don't - the rear is retained by the
seat runners, the front by three snaps each side.


----- Original Message -----
> And do NOT glue the carpets ! ! !

<Prev in Thread] Current Thread [Next in Thread>