Look at the material data sheet for any oil you consider.
I use Brad Penn in my flat tappet motors.
Google this issue and find numerous credible
arguments regarding the differences between
oils for modern engines and oils for the old
pre cat motors.
Art de armond
-----Original Message-----
From: Max Heim
Sent: Thursday, January 10, 2013 1:32 PM
To: MG List
Subject: Re: [Mgs] ZDDP
You may be correct about 1950s oil, but I think your conclusion is wrong.
There are many reports of premature cam and lifter wear using current oils.
My MGB cam wore itself down to about .25" lift, for example.
Look at it from an engineering perspective: zinc and phosphorus are
ingredients included specifically to protect against flat tappet cam wear.
Modern oils reduce the amounts of these elements because phosphorus destroys
catalytic converters, and they do not add any substitutes since they are
formulated for modern engines with roller cams and are targeted for low
friction/high fuel efficiency, not anti-wear characteristics. So it stands
to reason that modern oils do not protect flat tappet cams as well as
formulations with high zinc and phosphorus.
Maybe premature cam wear was an issue in the 1950s, too, but that doesn't
mean we have to live with it now. By the 1970s, at least, high ZDDP oils
were commonplace.
Should we go back to oil bath air filters, or leather disc shock absorbers,
because they used them in the 1930s?
--
Max Heim
'66 MGB GHN3L76149
If you're near Menlo Park, CA,
it's the primer red one with chrome wires
on 1/10/13 11:12 AM, Stephen West-Fisher at steve@coastaldatasystems.com
wrote:
> At the risk of another war-
> Just buy a good quality oil and forget about the ZDDP. Current oils have
> levels about the same as late 50s, early 60s oils.
>
> --
> Stephen West-Fisher
> N4IK
>
>
> -----Original Message-----
> From: mgs-bounces@autox.team.net [mailto:mgs-bounces@autox.team.net] On
> Behalf Of frankk12@verizon.net
> Sent: Thursday, January 10, 2013 2:04 PM
> To: MG List
> Subject: [Mgs] ZDDP
>
> Has anyone found a source for ZDDP that is reasonable? I checked MOss and
> the shipping is 50% of the cost of the ZDDP. My local NAPA store has
> never
> heard of it.
> Frank Krajewski
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/mgs/riverside@southslope.net
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2805 / Virus Database: 2637/6023 - Release Date: 01/10/13
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|