[Top] [All Lists]

Re: [Mgs] Brake Caliper Problem-Thanks

Subject: Re: [Mgs] Brake Caliper Problem-Thanks
From: David Ambrose <>
Date: Wed, 30 Jul 2014 14:58:43 -0700
Authentication-results:; auth=pass (PLAIN)
References: <Yc761o01X0NyJgq01c77Hp>
User-agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0
In my experience, brake rotors almost always have some wedge. If you 
have a micrometer, you can measure it. If you can turn the rotor by 
hand, you should be fine. The piston will retract a bit while driving.

On 7/30/2014 5:04 AM, Matthew Milkevitch wrote:
> 4) One additional
> observation:  the brake rotor rubbing is not constant over the total 360 deg
> rotation.  It turns freely during a part of the rotation, then another part it
> drags.  I'm therefore wondering if perhaps the rotor is warped or the mating
> surfaces between the rotor and hub have some junk in them.  I will disassemble
> that one side today and see what's going on.

<Prev in Thread] Current Thread [Next in Thread>