mgs
[Top] [All Lists]

Re: [Mgs] 1975 MGB Starter Motor

To: <mgs@autox.team.net>, "Mark Robinson" <markrob@mindspring.com>
Subject: Re: [Mgs] 1975 MGB Starter Motor
From: "PaulHunt73" <paulhunt73@virginmedia.com>
Date: Mon, 23 Aug 2021 16:38:18 +0100 rexz9kgeYL/FEvlhlebBbildoJvYhx/HmZVScnipmPfwN54kpeguCsmf1To5ob5NFmi5yNrD5Wzaf2Cf6w9fzBXSiIEtkyPOTWXsuE+wCY/Ui7+JrSGRZkEi
Delivered-to: mharc@autox.team.net
Delivered-to: mgs@autox.team.net
References: <!&!AAAAAAAAAAAuAAAAAAAAAOnhCsnYO9VEhp27PxMC6HQBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAADENPx+D06AQI6lO2R9PWe4AQAAAAA=@hartcom.net> <91dc4e70-b963-3d3b-53ef-a37ef8d24ee1@mindspring.com>
My 73 doesn't have the cover, but if you can remove all the connections and 
the mounting bolts now I'd have thought by pushing the cover back on you 
could remove the two together.  I can't see the cover mentioned for removal 
of either type of pre-engaged in either the WSM or Haynes.  Unless 
frequently driven in very wet and salty conditions I'd ponder leaving it 
off.

PaulH.

----- Original Message ----- 
I need to remove the starter motor on my 1975 MG. I tried to remove the
rubber motor cover and was able to slide it forward but I couldn't pull
it out. I am working from below. With the cover pulled forward I can
access the solenoid wiring bolts and also the motor mounting bolts. Can
I remove the starter motor together with it's cover as one assembly ? I
plan on removing the starter from below as the vehicle is up on a four
post lift and the clutch solenoid is removed.

_______________________________________________

Mgs@autox.team.net

Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>