Thanks for the suggestion, I might try somthing like that which would make
it appear original. However I have two motives in mind. One is an electric
pump will work better and two, I would like to eliminate the potential oil
leak that the mechanical pump currently provides.
Thanks again.
Eric
At 08:31 AM 5/29/00 +0200, Harald Sakshaug wrote:
>Remove the interior of the pump and replace it with a piece of tubing
>allowing the fuel to pass straight through it. If you refit the fuellines
>on the pump, it will look a 100% original, and you will not need a cap for
>the hole.
>Hiding the electrical pump in the tank area, out of sight, should not be any
>problem.
>
>Harald Sakshaug
>
>-----Opprinnelig melding-----
>Fra: Eric Cummins [mailto:ecummins@bellsouth.net]
>Sendt: 26. mai 2000 21:17
>Til: morgans@autox.team.net
>Emne: Plus 4 fuel pump plate
>
>
>Folks,
>
>I have a 59 +4 with the TR3 engine. I am going to replace the mechanical
>fuel pump with an electric pump. I would like to remove the existing pump
>and put a cover over the hole. Does anyone on the list know if there is a
>supplyer that makes a plate to cover the hole where the fuel pump goes or
>will I need to make one ?
>
>Thanks,
>Eric C 59 +4 2 str
>
>
|