> Anybody
> got a good guess at the gap or dwell specs for a generic 350 circa
> ~1972?
Ryan, my Haynes manual for my 72 Chevelle lists the following specs:
breaker point gap: .019"
dwell angle: 29-31 degrees
centrifugal advance: roughly 11-12 degrees @2200 RPM
vacuum advance: 0 degrees @ 8" mercury
15 degrees @ 15" mercury
ignition timing: 6-8 degrees BTDC at idle
Rough guesses in a couple of cases, especially the centrifugal advance
due to the differences in motor HP offered in the 72, but should get you
in the ballpark.
Wally / Templeton, MA
53 3100
72 Chevelle Malibu
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|