Been gone for a while so I haven't had time to respond to the Desert Cooler
Radiator inquiry. Both the standard size replacement radiator and the Desert
Cooler Radiator are being built with the bracket location in a different spot
than the original radiators. The weld spot on the upper part of the bracket
is the same as the original but the lower bracket is spot welded in the
middle of the radiator and not flush with the core as the original radiator
is. This will move the lower half of the radiator to move closer to the
engine causing clearance problems between the radiator and engine fan
(especially if the 235 engine has replaced the original 216) for AD trucks.
Randy "47 series 3800
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|