oletrucks
[Top] [All Lists]

Re: [oletrucks] Master Cylinder again!

To: "Jeff Davis" <jsd51@hotmail.com>, <oletrucks@autox.team.net>
Subject: Re: [oletrucks] Master Cylinder again!
From: "jack halton" <safesix@worldnet.att.net>
Date: Fri, 13 Aug 1999 21:56:00 -0400
On a pickup truck, my feeling is that you wil pretty much always need a
proportioning valve, you have to reduce pressure in the rear or the brakes
will lock up prematurely if there's no load in the bed.

Jack / Winter Park FL
----- Original Message -----
From: Jeff Davis <jsd51@hotmail.com>
To: <oletrucks@autox.team.net>
Sent: Friday, August 13, 1999 7:31 PM
Subject: [oletrucks] Master Cylinder again!


>      Reading all this good Q & A on brakes made me think of a guestion of
my
> own. If running disc brakes all the way around do you need the
proportioning
> valve? If so, are you trying to get more braking out of the front or out
of
> the rear? Since I have this setup and a mastercylinder is in the future
> figured now would be as good a time as any to do the investigation. Thanks
> in ADvance for all the good info. in this list.
>
> Jeff Davis
> '51 custom.
>
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>